How to use the flat rental LED display to seamlessly splice the EA1000H4 curved rental LED screen. The detailed procedure are as follows:

Left: Curved lock rental LED display

Right: Flat lock rental LED display

Firstly, we need to replace the green quick lock to our black quick lock, the specific steps are as follows:

• Confirm the location of the groove
• Installation of the black fast lock
• Repeat the installation of other black quick locks, until all quick locks are installed

Next, we should adjust the arc lock to a scale of 15 and secure it:

• Rotate the arc lock to a scale of 15 to ensure it is at the correct angle.
• Use the screws to fix the arc lock to make sure it will not move during operation.

Then, we pull the flat rental LED screen over for docking:

• Move the flat rental LED display screen next to the curved rental LED screen, align their connection point.
• After the docking point is aligned, use the quick lock to lock the two screens.

If you want to adjust the screen angle, please follow the steps below:

• Release the surface lock first, and the surface lock can move freely.
• Adjust the curvature parameter according to your needs

This is the EA1000H4 curved rental LED display and flat rental LED screen splicing operation detailed steps, through these steps can achieve two kinds of LED screen seamless splicing, for a variety of occasions to provide better visual effect and display effect.