If you don’t know exactly how to install the P1.25 indoor small pitch LED video wall. This video will show you detailed installed steps to help you quickly install indoor fixed LED displays.

Step 1: Install the support structure for LED video wall

• Use the support bracket to mark the position where you need to drill holes
• Use electric drill to drill holes on the wall, place the support bracket on the marked position
• Put the expansion bolts into the holes and hammer the nails into the holes
• Prepare the connecting iron piece that connects the two support brackets
• Fix it to the inner end of the support bracket with screws and tighten it with an electric drill

Step 2: Install the cabinet to the support bracket

• Screw 4 M10 screws into the 4 screw holes and place the cabinet on the support bracket
• Align the M10 screws with the lifting holes of the support bracket. Ensure that the cabinet is firmly fixed on the support bracket.
• Connect and fix the adjacent cabinets, and then install the second row of brackets, aligning the lifting holes of the brackets with the M10 screws.

Step 3: Install the Cable

• Connect the power cable through the reserved holes between the two cabinets

Step 4: Install the LED display

• Adjust the cabinet flatness to achieve completely flat.

Step 5: Power on test

• Power on and test whether the LED power indicator and LED receiver card indicator work normally.

Step 6: Install LED module

• Start to install the LED module according to the direction of the arrow inside the module.

Step 7: Aging Test

• After the installation of the module is completed, switch on the signal source playback box and power supply, and light the LED display.